Showing posts with label Fantasy. Show all posts
Showing posts with label Fantasy. Show all posts

Tuesday, 25 June 2019

Summer Fairies - All My Love




Materials:
1 A4 White Card 
Mini Easel Sheet 
Gems/Glitter 
Embellishments


Equipment:
Scissors 
Trimmer 
Double sided tape 
Foam Pads/Silicone Glue 
Score Board 
Bone Folder 
Quickie Glue Pen


What You Need to Do:
1) Print out all your elements from your free cd. Print all on paper, and back your main topper and sentiment onto card.
2) Cut your card to measure 14cm x 27cm and fold in half. Then fold the top layer in half to make an easel card.
3) Cover the front with the backing paper that looks like its divided and rescore the fold line.
4) Attach the other backing paper to the inside back.
5) Attach your topper to the front of your card below the sore line as shown.
6) Cut out a sentiment onto card and attach to the inside back using foam pads to act as a stopper or cut out and make up the bow and use that as a stopper.
7) Add extra embellishments, gems and glitter to finish.

Monday, 18 March 2019

Journey to Wonderland - Sorry It's Late - Project of the Week



Materials:
8" x 8" white card
Topper Sheet
Backing Paper
Sentiment


Equipment:
Trimmer/ Craft Knife
Scissors
Double Sided Tape/Craft Glue
Sticky pads/Silicone glue


What You Need to Do:
1) Cut out your backing paper and attach to the card front using double sided tape or craft glue.
2) Cut out the ribbon strip from the topper sheet and attach diagonally across the top and bottom corner of the card as shown.
3) Cut out your topper and attach centrally to the card front using foam pads or silicone glue (if using silicone glue you now need to put your project to one side before continuing, to allow it to dry)
4) Attach the two sentiments - one in the top left corner and one in the bottom right corner. Because the topper is raised with foam pads the outside edge of the sentiment need to have a foam pad under it but the inside edge (over the topper) only needs glue or double sided tape) to keep it flat with the topper.
5) Finally the card can be decorated with glitter or gems as you want to.

Thursday, 11 October 2018

Twilight Queen - Many Happy Returns - Project of the Week



Materials:
1 A4 White Card
Quick Card Shee

Coloured Card for Matt and Layering

Equipment:
Scissors
Trimmer
Double sided tape
Foam Pads/Silicone Glue
Score Board
Bone Folder
Quickie Glue Pen


What You Need to Do:
1.Print off your quick card sheets from the CD.
2.Back your paper onto card to give support or if your printer will take it print your images directly onto card.
3.Cut out all your elements from the sheet.
4.Back the main topper onto co-ordinating card. Cut out following the shape of your topper and leaving a small even gap around the edges.
5.Attach to the centre of your card a shown using foam pads.
6.Cut both ribbon strips from your sheet. Trim one smaller and matt on top of the other using foam pads. Attach as shown using foam pads.
7.Cut out your sentiment and back as before onto co-ordinating card. Attach using foam pads.
8.Use the extra elements to add interest to the inside of your card.

Tuesday, 27 March 2018

Project of the week: Spring Fairies

Fairy Middle Stepper Card
Materials
Template
A4 Card
Mirror Card
Gems/Glitter
Embellishments

1. Print off the Middle Stepper template. Transfer all the markings to the card. Cut on solid lines score on broken lines. Reinforce all the score lines with a bone folder. Gently push the card into shape.
2. Print off all the other elements. If your printer will take it print the design sheet directly onto card to give support otherwise back onto card now.
3. Cut a piece of backing paper to fit the main front section of the card. Use the card to draw around on the back of the paper then attach using double sided tape or glue.
4. Cut the ribbon strip from the design sheet. Attach to the side sections as shown using tape or glue.
5. Cut out your topper and matt onto mirror card. Cut out following the shape and then attach to the main section of the card using foam pads.
6. Matt a sentiment onto mirror card and cut out as above. Attach as shown using foam pads on the outsides of the sentiment, slightly pushing in the sides to give it a bowed effect.
7. Add glitter and gems to finish.

Tuesday, 13 March 2018

Project of the week: Angels of Friendship

Faith Hope and Love
Materials:

1. Using your card blank, draw a diagonal across from one end to the other and cut across.  This will be your card shape.

2. Using contrasting papers, fix to the inside and front of your card blank using double sided tape or craft glue.  

3. Tear a strip of contrasting backing paper and fix to the inside right as shown using double sided tape or craft glue.

4. Cut out your topper and fix to the front section of your card using foam pads. To give more dimension, pleat the lace and fix to the base of the card as shown.  Fixing into place using craft glue.

5. Cut out your ribbon strip and fix ontop of your lace.

6. Using a Quickie glue pen, add glitter around the angels wings.

7. Choose 2 sentiments, fix one at the bottom left hand side with feathers.  Then fix the other at the top left hand side as shown using foam pads.

8. Finish by adding self adhesive gems.

Wednesday, 7 February 2018

Steam Punk Demos

As promised here are the projects I made on Create and Craft Yesterday from the new Steam Punk Steam Age collection
Thank You
Materials:

Blending Mat
Blending Tool
Quickie Glue Pen
Scissors
Trimmer
Double sided tape
Foam Pads/Silicone Glue
Score Board
Bone Folder

Instructions:
1. Using the kraft card, trim one down to 21cm x 21cm, and the other 24cm x 21cm.  On the second piece score a line done at the 21cm mark.  This will create a tab, which will enable you to join the 2 pieces together to create a large square card.

2. Cover the front of your card with your chosen backing paper, leaving a 3mil boarder.  Using a blending mat, blending tool and distress ink, rub ink around the edges to give a more vintage feel.

3. Using a contrasting backing paper, tear a section off and fix to the bottom left hand side using double sided tape or glue.

4. Cut out your topper and decoupage any layers up using foam pads.  Then fix your topper to the left hand side of your card.  

5. Cut out a ribbon strip and fix along the bottom of your card.

6. Attach your chosen sentiments and paper embellishments to the card as shown using foam pads.

7. Finish off the card by adding touches of stardust glitter using a quickie glue pen. 

Let Your Dreams Take Flight
Materials:

Scissors
Trimmer
Double sided tape
Foam Pads/Silicone Glue
Score Board
Bone Folder
Acrylic block

Instructions:
1. Using the side scene sheets, cut out all your elements.

2. Once you have cut the main section, then score (see diagram 1 on the sheet)  on the broken lines.  Fold into shape to create a fold back card.

3. Then with the long section (see diagram 2 on the sheet), score the lines and fold.  Fix the section to the bottom left hand side of the card and then to the bottom right hand side (see diagram on the sheet, where it is highlighted).  This will create the centre section of your dimensional card.

4. To decorate the centre section, side score your element and attach in height order using double sided tape or craft glue.

5. Finish off the card by adding extra toppers and elements to your card

Happy Birthday

Materials:
1 x A4 Kraft card
Enamelling Magic
Clear Embossing ink

Scissors
Trimmer
Double sided tape
Foam Pads/Silicone Glue
Score Board
Bone Folder
Acrylic block

Instructions:
1With your kraft card, fold in half to create a card blank.

2. Using your Steam Punk insert toppers, trim in half.  Fix one part to the front of your card blank and the other part in the inside using double sided tape or craft glue.

3. Cut out a ribbon strip and fix to the left hand side of your card using foam pads.

4. Choose a topper, and enamel the surface using enamel magic and embossing ink.  

Visit www.debbimoore.tv to see how to use enamelling magic.

Wednesday, 31 January 2018

Enchanting Cards



Take a peak at some of the samples on Create and Craft tonight at 7pm from the Enchanting Realm collection. The new Monochrome card kit is perfect for creating classic cards with a bit of added sparkle from our stardust glitters. If you're feeling more adventurous they are also great for inking and colouring! The full range also comes with striking two tone coloured options ideal for all your craft projects.

Tuesday, 16 January 2018

Project of the week: Steampunk

Happy Birthday

Materials
1. Print off the backing paper and design sheet.

2. Score and fold the A4 card in half to make an A5 card blank.

3. Cut backing paper slightly smaller than the front of the card and attach using double sided tape or glue.  Make sure there is an even gap around the edges.  

4. Cut a ribbon strip, topper and sentiment from the design sheet.

5. Attach the ribbon strip down the left hand side using tape or glue.  Then attach a topper to the front as shown.

6. When attaching the sentiment put a foam pad at each end, then gently push together to bow slightly.  Press firmly at the edges.

7. Finish by adding highlights of glitter gems.

Friday, 7 July 2017

Wednesday, 5 April 2017

Angels of Friendship

Angel Card Projects

Some inspirational card ideas from the team using the Angels of Friendship craft range. Use the paper crafting designs alongside feathers and lace to create beautiful ethereal projects. 

Monday, 20 February 2017

Fantasy Fun

Journey to Wonderland Create and Craft Launch

A busy day on Create and Craft Launching the fun Journey to Wonderland Collection! We have so many new products on the show from our Dimensional Crafting CD Rom containing our new side scene cards (see below) to Crafting Compendium Kits and a new Fantasy Crafting USB Key this is a great collection for the whole family!