Project of the Week: Flutterby Delights

Materials:
White Card 
Backing Paper 
Design Sheet 
Gems 
Stardust Glitter

Equipment:
Basic Craft Equipment

What You Need to Do:
1. Using your white card, cut it down to 35cm x 13cm. Then fold in half to create your card shape.

2. Cut out your backing paper and fix to the front of your card using double sided tape or craft glue.

3. Cut out a ribbon strip and fix to the left hand side of your card.

4. Cut out your topper and fix to the centre card using foam pads or silicone glue. If using silicone glue leave your work to one side to dry for at least an hour.

5. Cut out a sentiment and fix to the bottom right hand side with foam pads.

6. To finish add touches of glitter and gems to your card.

Project of the Week: Steam Punk

Materials:
A4 White Card
Paper
Topper
Embellishments

Equipment:
Basic Craft Equipment

What You Need to Do:
1. Using an A4 measure and mark across the long edge at 5cm, 10.1cm and 20.3cm then score down the page at these marks.

2. Push the card into shape and reinforce the score lines with a bone folder.

3. Cover the front sections with backing paper, making sure there is an even gap around the edges. Attach using double side tape or glue

4. Cut out your main topper and attach it to mirror card. Cut out leaving a small even gap around the edges

5. Attach the ribbon strip along the bottom. Make up the dimensional flowers and fix with a strong glue. Cut out the extra sentiments and attach with foam pads.

Christmas Fairies - Merry Christmas - Project of the Week

Materials:
Decoupage Sheet 
Backing Papers 
2 A5 White Card Blanks 
Ribbon Strip 
Glitter

Equipment:
Paper Trimmer 
Bone Folder 
Wet Craft Glue 
Foam Pads 
Quickie Glue Pen

What You Need to Do:
1. Using one of the A5 card blanks, fold back the front of the card. Then rpeat the Using the DL card cover the front of the card using your chosen backing paper and double sided tape or wet glue.

2. From your decoupage sheet cut out all your layers and layer up your image using foam pads or silicone glue. If using silicone glue, make sure you leave your work to dry for at least an hour.

3. Fix your decoupage to the centre of the card using foam pads.

4. Then add a sentiment to the bottom of the card fixing bottom centre of the card.

5. To give your fairy that magic touch, using a quickie glue pen add glitter highlights around the details of the wings. 

Santa Claus - Side Scene Card

Materials:
White A4 Card 
Side Scene Card Sheets 
Embellishments

Equipment:
Scissors
Trimmer
Double sided tape
Foam Pads/Silicone Glue
Score Board
Bone Folder
Blending Tool
Quickie Glue Pen

What You Need to Do:
1) Print out all the elements from the collection. If your printer takes card, print directly onto card. If you can not print onto card, print onto paper and back onto card.

2) Cut out your main card base (see diagram 1 on the sheet). Cut on the solid lines and score on the broken. Fold into shape to create a fold back card.

3) Cut out the long tab (see diagram 2 on the sheet), then score the lines and fold. Then fix it to the bottom of the left hand side of the card and then to the bottom of the right hand side. (see diagram on the sheet, where it is shown in green).

4) Then fold into shape.

5) Cut out panels 3 and 4 from your design sheets. Then fold back the tabs. Attach them to the middle section of the main card in height order using double sided tape or glue.

Summer Days - Have an Amazing Day

Materials:
A5 Card Blank
Design Sheet
Backing Papers
Distress Inks
Lace 
Silk Flowers
Ribbon

Equipment:
Basic Craft Equipment

What You Need to Do:
1) Print off your chosen backing paper and topper

2) Tear your paper slightly smaller than the front of the card blank. With your finger gently roll some of the edges to give it a more distress look. Attach to the front of the card with tape or craft glue.

3)Use distress inks in coordinating colours and blend around the edges of the card.

4) Cut a length of lace slightly longer than the width of the card. Run one of the distress inks across to colour the card slightly gathering it as shown.

5) Tear around your chosen topper and blend distress inks around the edges as before. Attach to the card front with foam pads at a slight angle.

6) Cut out some small sentiments from the craft sheet. Tie a piece of ribbon around one and fix to the top of the card with foam pads.

7) Make up a small bouquet of silk flowers and tie with a ribbon. Attach to the bottom of the card to finish.

Summer Fairies - Just for You

Materials:
A4 White Card
Design Sheet
Backing Papers
Magic Dust Glitters 
Gems
Blue Distress Ink

Equipment:
Scoreboard
Bone Folder
Glue or Double Sided Tape
Quickie Glue Pen
Scissors
Paper Trimmer

What You Need to Do:
1) Using the card landscape, score and fold the A4 card 9.5cm in from the left hand side. 

2) Cover the front with your chosen backing paper. 

3) Rub distress ink around the edges to give a more vintage look. 

4) Cut out a ribbon strip and fix to the side panel at angles as shown using double sided tape or wet glue. 

5) Cut out your topper and fix to the left of the card using foam pads. 

6) Cut out a sentiment and fix to the top right hand side using foam pads. 

7) Using the magic dust glitter and a quickie glue pen add glitter hightlights along the fairy wings. 

8) Finish by adding gems.

Art Deco Decadent Christmas - Feather Glamour

Materials:
A4 White 
Card Topper 
Backing Papers 
White Feathers

Equipment:
Scoreboard 
Bone Folder 
Glue or Double Sided Tape 
Quickie Glue Pen 
Scissors 
Paper trimmer

What You Need to Do:
1) Cut down you card to 18.5cm x 29.7cm, then fold in half to create your card blank. Mark and score at 8cm and 11.5cm. Using a bone folder fold back the first score line and then forward the second score line. This will create your card shape. 
2) Cover the front and the inside back with backing paper using double sided tape or glue. 
3) Cut out the ribbon strip and fix to the right hand side as shown. 
4) Cut out your topper and sentiment, and back it with card to make it sturdier. 
5) Attach white feathers to the back of the topper, then fix the topper onto the front panel, using silicone glue, (make sure you leave your work to dry for at least an hour). 
6) Attach the sentiment on top of the topper using foam pads, allowing it to overhang as shown. 
7) Finish off adding glitter highlights and gems to the card.

Flutterby Delights - Happy Birthday

Materials:
Square card blank
Backing Papers 
Design sheet 
Stardust Glitter

Equipment:
Basic Craft Equipment

What You Need to Do:
1) Print out all your elements from the collection.

2) Using the backing paper, cover the front of the card using craft glue or double sided tape.

3) Cut out your topper and fix to the top left hand side as shown.

4) Cut out a matching ribbon strip and fix along the bottom of the card using double sided tape or craft glue.

5) Choose a sentiment and fix to the right hand side using foam pads.

6) Cut out extra embellishments and fix to the card as shown.

7) Add self adhesive gems to the centre of the flowers.

8) Finish the card by adding touches of glitter using a quickie glue.

Summer Fairies - All My Love

Materials:
1 A4 White Card 
Mini Easel Sheet 
Gems/Glitter 
Embellishments

Equipment:
Scissors 
Trimmer 
Double sided tape 
Foam Pads/Silicone Glue 
Score Board 
Bone Folder 
Quickie Glue Pen

What You Need to Do:
1) Print out all your elements from your free cd. Print all on paper, and back your main topper and sentiment onto card.

2) Cut your card to measure 14cm x 27cm and fold in half. Then fold the top layer in half to make an easel card.

3) Cover the front with the backing paper that looks like its divided and rescore the fold line.

4) Attach the other backing paper to the inside back.

5) Attach your topper to the front of your card below the sore line as shown.

6) Cut out a sentiment onto card and attach to the inside back using foam pads to act as a stopper or cut out and make up the bow and use that as a stopper.

7) Add extra embellishments, gems and glitter to finish.

Oriental Promise - Koi Surprise - Project of the Week

Materials:
A4 White Card
Design Sheet 
Backing Paper 
Black card
Gold card
Green Ribbon
Pearl Drops
Stardust glitter

Equipment:
Trimmer/craft knife
Scissors
Score board
Bone folder
Double sided tape
Foam pads/silicone glue

What You Need to Do:
1) Cut down your card to measure 21cm x 21cm.Then fold in half to create your card shape.

2) Cover your card by matt and layering your backing paper with gold and black card as shown. Attaching into place using double sided tape or craft glue. Leave a 3mm white edge as.

3) Wrap a piece of ribbon around the mounted backing paper and fix to the card.

4) Cut out your topper and attach to the centre with foam pads or silicone glue. If using silicone glue, leave your work to dry for at least an hour.

5) Fix pearl drops to the four corners.

6) Finish by glitter highlights to your card using a quickie glue pen.

Pocket Full of Memories - Explore a Dream - Project of the Week

Materials:
A4 White Card 
Backing Papers 
Design Sheet 
Glitter/Gems 
Ribbon

Equipment:
Basic Craft Equipment

What You Need to Do:
1) Score and fold an A4 card in half to make an A5 card blank. Rotate the card so the spine is along the top. Using your free cds print out all your elements.

2) Cut out your backing paper and fix with double sided tape or glue to the front of your card.

3) Cut out your topper and attach to the left hand side of the card using foam pads.

4) Cut out your sentiment topper and attach to the right hand side of the card using glue and foam pads.

5) Then cut out your ribbon strip and fix along the bottom edge of your card, attaching with double sided tape or glue.

6) To finish add some glitter highlights using a quickie glue pen.

Angels of Friendship - Everything Beautiful has its Moment - Project of the Week

Materials:
A4 White Card 
Design Sheet 
Backing Paper 
Stardust Glitters 
Feathers 
Lace 
Gold Mirror card

Equipment:
Scoreboard 
Bone folder 
Glue or Double Sided Tape 
Quickie Glue Pen 
Scissors 
Paper Trimmer

What You Need to Do:
1) Score and fold the A4 card in half to make an A5 card blank.

2) Cut out a piece of gold card a little smaller than your card base. Then matt and layer your backing paper on top of the card.

Crafting Expression...Matt and Layer means to layer up different papers to give dimensional finish

3) Wrap a large piece of white lace around the centre of your card, then fix to the card as shown using double sided tape or craft glue.

4) Cut out your ribbon strips and fix along the top and bottom of the card, attaching with foam pads or silicone glue. If using silicone glue remember to leave your work to dry for at least an hour.

5) Cut out your chosen topper and attach to the centre of the card.

6) Glitter your Angel using the Stardust glitters and a quickie glue pen.

7) Cut out a sentiment and attach to the top and bottom of the card using foam pads.

8) Finish by making an embellishment using feathers, lace and a topper. Fix to the right hand side of the card as shown using silicone glue.

Art Deco - Fold Card - Project of the Week

Materials:
A5 White Card Blank
Backing Papers 
Design Sheet
Glitter
Gems

Equipment:
Scissors
Trimmer
Double sided tape
Foam Pads/Silicone Glue
Score Board
Bone Folder
Quickie Glue Pen

What You Need to Do:
1) Using the A5 card, fold back the top layer to make a fold back card.
2) Cut backing paper to fit the front and inside of the card and attach using double sided tape or glue.

3) Cut out your topper and topper to the left hand side with foam pads, making sure you only fix the topper to one side so it over hangs.

4) Cut out a sentiment and fit to the top left using foam pads.

5) Cut out an extra topper or sentiment and fix to the inside of the card.

6.) Finish off by adding glitter highlights or gems.

Mermaid Dreams - Swim With Passion

Materials:

Square white Card Blank
Design Sheet 
Backing Paper 
Stardust Glitter
Red ribbon
Buttons

Equipment:

Scoreboard
Bone folder
Glue or double sided tape
Quickie Glue Pen 
Scissors
Paper trimmer

What You Need to Do:

1) Using the square card, score from the bottom left hand corner to the top right-hand corner, fold and reinforce using your bone folder. This will create your twisted easel card shape.

2) Cut out your backing paper and cover the sections of your card as shown.

3) Fix a piece of ribbon along the side of the card as shown.

4) Cut your topper and fix to the front below the score line using double sided tape or craft glue.

5) Fix a button or embellishment to your card base using foam pads/silicone glue. This will act as a stopper and hold your card up. If using silicone glue, leave your card to dry for at least an hour.

6) Choose a sentiment and fix to the topper using foam pads.

7) Finish by adding glitter highlights using a quickie glue pen.

Journey to Wonderland - Sorry It's Late - Project of the Week

Materials:
8" x 8" white card
Topper Sheet
Backing Paper
Sentiment

Equipment:
Trimmer/ Craft Knife
Scissors
Double Sided Tape/Craft Glue
Sticky pads/Silicone glue

What You Need to Do:
1) Cut out your backing paper and attach to the card front using double sided tape or craft glue.

2) Cut out the ribbon strip from the topper sheet and attach diagonally across the top and bottom corner of the card as shown.

3) Cut out your topper and attach centrally to the card front using foam pads or silicone glue (if using silicone glue you now need to put your project to one side before continuing, to allow it to dry)

4) Attach the two sentiments - one in the top left corner and one in the bottom right corner. Because the topper is raised with foam pads the outside edge of the sentiment need to have a foam pad under it but the inside edge (over the topper) only needs glue or double sided tape) to keep it flat with the topper.

5) Finally the card can be decorated with glitter or gems as you want to.

The Flower Patch - Enjoy Every Minute of your Retirement - Project of the Week

Materials:
Square card blank
Design sheet 
Backing Paper 
Contrasting Backing Paper
Stardust Glitter

Equipment:
Scissors
Trimmer
Double sided tape
Foam Pads/Silicone Glue
Score Board
Bone Folder
Quickie Glue Pen

What You Need to Do:
1) Cover the front of your base card with your chosen backing paper. Fix into place using double sided tape or craft glue.

2) Using a contrasting backing paper, cut out a section to look like a ribbon strip.

3) Cut out your main topper and fix at an angle using foam pads or silicone glue. If using silicone glue leave to dry for an hour.

4) Cut out extra embellishments and fix them around the card as shown using foam pads or silicone glue.

5) Cut out a sentiment and fix to the middle of the card.

6) Finish the card by adding touches of glitter using a quickie glue pen to your toppers.